Flowserve I-75 Interface Manuel d'utilisateur télécharger pdf

Worcester Actuation Systems

1. Description

The I-75 Interface is designed to be used and mounted in the Series

75 Actuator as one of many standard options. Function of the I-75

Interface is to allow the Series 75 Actuator to be powered by a 120 or

240 VAC power supply, operated directly by any programmable

controller, microprocessor, and/or computer regardless of the output

rating of these devices. Depending on the control input to be used,

there are several options of the I-75 Interface:

These options are identified by the nameplate on the circuit board.

5V for 5 VDC input

XV for 12 VDC input

XX for 24 VDC input

15 for 120 VAC input

2. Installation of I-75 Interface Board into

Series 75 Electric Actuator

2.1 Check Kit for Parts:

Common Parts for Sizes 10-30 Actuators

Qty. Name

1 Circuit Board Subassembly

1 Insulating Board

5-6 Washers (Nylon)

5-6 Grommets (Rubber)

5-6 Mounting Screws

5 Cable Ties

1 Wiring Label

1 Closed-End Splice

1 Wire - White

Additional Parts for Sizes 10-23 Actuators

Qty. Name

1 Bracket - Right

1 Bracket - Left

2 Spacer (Bracket)

2 Mounting Screw (Spacer/Bracket)

Additional Parts for 240 VAC Option

Qty. Name

2 Limit Switch

1 Lead Assembly - Gray

1 Lead Assembly - Blue

Additional Parts for Sizes 25, 30 Actuators

Qty. Name

1 Mounting Bracket

2 Mounting Screw (Bracket)

Tools needed for assembly:

4" Nut Driver,

8" Screwdriver and Needle Nose Pliers.

FCD WCAIM2000-00

(Part 06094)

I-75 Interface

Installation, Operation and Maintenance Instructions

Figure 1

1 2 3 4

Résumé du contenu

Page 1 - I-75 Interface

Worcester Actuation Systems1. DescriptionThe I-75 Interface is designed to be used and mounted in the Series75 Actuator as one of many standard option

Page 2 - Worcester Actuation Systems

2Flow Control Worcester Actuation Systems2.2 Assembly Procedure2.2.1 For 10-23 Size Electric Actuators (See Figure 2):A. Pre-tap circuit board bracket

Page 3 - 3. Wiring

3Flow Control Worcester Actuation Systems3. Wiring3.1 External Power - 120/240 VAC Option (Figures 3 and 4):NOTE: All wiring to terminal strip should

Page 4 - 4. Indication and Repair

3.3.2 PC Board - 240 VAC (Figure 4):For I-75, 240 VAC option only, the limit switches (SW-1, SW-2)are used to interrupt CW, CCW input signals, therefo

Commentaires sur ces manuels

Pas de commentaire

Flowserve I-75 Interface Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Flowserve I-75 Interface. Flowserve I-75 Interface User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Flowserve I-75 Interface