Flowserve PMV P4 Manuel d'utilisateur télécharger pdf (Page 16)

16

WARNING! Units installed in hazardous

areas must have proper approvals.

The I/P unit is mounted directly on top of

the positioner unit.

No external air supply is needed since the I/

P unit is supplied with air from the positio-

ner unit.

Port I on the positioner unit will be plugged

when the I/P unit and the appropriate gauge

block gasket installed.The I/P unit accepts a

4-20 mA input signal.

11. I/P Unit (P5/EP5)

1

2

The I/P unit is equipped with a built in 30

micron filter (Fig 4).

Caution: Do not operate the unit without fil-

ter and filterplug installed.

Ensure that wiring between I/P and termin-

als are properly seated in rubber clamp.

Do not unscrew filterplug when the positio-

ner is pressurized.

Span and Zero for the I/P converter is factory

set and can not be adjusted

Fig 3

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Commentaires sur ces manuels

Pas de commentaire