Installation InstructionsPac-Seal Type 16Mechanical Shaft SealTM Experience In Motion
2Description The Pac-Seal Type 16 was designed to be the best partially-unitized rotary seal available in the highly competitive market. The Type 16 i
3Seal Chamber Requirements Figure 2Sleeve or shaft finish to be1.6 μm (63 μinch) R or betteraShaft or sleeve OD-0.050 mm (-0
1.5 Thoroughly inspect and clean the seal chamber and shaft or pump sleeve. Inspect for corrosion or any defects. Remove all burrs, cuts, dents or de
52.4 Lubricateinnerdiameter(ID)oftherotatingsealheadelastomerbellows with Pac-Ease. Note: Any oil, Grease, assembly lubricant ngerprints,
63 Type 16 Operational Recommendations3.1 Remove lock outs on equipment and valves3.2 Do not start up the pump dry to check motor rotation or for
7
TO REORDER REFER TOB/M #F.O.FIS218eng ORG 04/13 Printed in USAflowserve.comTo find your local Flowserve representativeand find out more about Flowserve
Commentaires sur ces manuels