Flowserve ISC1EX Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Flowserve ISC1EX. Flowserve ISC1EX User Manual Manuel d'utilisatio
- Page / 8
- Table des matières
- MARQUE LIVRES
Résumé du contenu
Repair InstructionsISCFlow Solutions DivisionISC1EXSingle Elastomer Bellows
2 DisassemblyWhen disassembling seal, inspect for conditions which may have caused theneed for the seal to be removed from service. If seal was remove
3.2 Gland Assembly 1 (Figure 2)A Mating ring O-ring surface - Inspect for wear,fretting, nicks, scratches, or corrosion.Required surface finish: 6
44 Seal Assembly Instructions4.1 Tools Required•3/32", 1/8" hex key wrenches (Sizes < 2.625"); 1/8", 3/16" hex keywrenches
54.5 Align the two flats on themating ring 3 with the twoflats on the inside of thegland drive ring in thegland assembly, and pressthe mating ring i
64.9 Place the gland/matingring assembly face downover the sleeve/rotary unitassembly. Do not com-press. (Figure 9)4.10 Place the sleeve collar 9onto
76 Installation6.1 Refer to the ISC Installation Instructions, FIS120, for proper seal installation. 3 Trademark of Minnesota Mining and Manufacturing
TO REORDER REFER TOB/M #F.O.FIS142ORIG 03/01 USAFlowserve Corporation Flow Solutions DivisionPrinted in U.S.A.ISO 9000CertifiedGermanyBrazilMexicoKala
Produits connexes et manuels pour Matériel Flowserve ISC1EX
(15 pages)
(19 pages)
(12 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels