Flowserve MSS Manuel d'utilisateur

User Instructions- Original Instructions- Split Mechanical Seal MSS For Piloted and Non-Piloted ModelsInstallation and Maintenance Instructions for Ma

10 ! Be careful not to let O-ring fall in to the bore.6.4 Install the stationary face halves2around the shaft with the lapped face outward (non-lappe

11Split Mechanical Seal MSS - Installation and maintenance instructions for machinery partsthe seal chamber face for the inner stationary face O-rin

120.12“ (3 mm) spring gap is achieved using the two 1/8“ Allen wrenches as spacers. Tighten the shoulder screws completely and lock seal drive to shaf

13Split Mechanical Seal MSS - Installation and maintenance instructions for machinery parts 4.500 6.88 0.500 9.25 8.25 1.06 3.38 4.38 4.625

146.19 Install the stationary face halves2 around the shaft with the lapped face outward (non-lapped face is identified with a groove or part marking

15Split Mechanical Seal MSS - Installation and maintenance instructions for machinery parts6.29 Install the white split backing ringP1 into the sea

168.3 For the static pressure test on the product vessel the vessel pressure may not exceed the values given under item 1.1. Temperatures at the com

17Split Mechanical Seal MSS - Installation and maintenance instructions for machinery partsdisposal of the media collected when the machine is vente

18MIXERPAC. The MIXERPAC will be inspected and if repairable, a quotation will be made for restoring it to ist original condition. Upon acceptance of

-21-FIS130eng Rev 07/10 Printed in Europeflowserve.com© Copyright 2010 Flowserve Corporation TO REORDER REFER TOB/M or Assy. #Order #Seal TypeTo fin

21. Drawing, Brief Description, Function See the annex for the installation drawing.1.1 Specifications for the operations described herein: Applica

3Split Mechanical Seal MSS - Installation and maintenance instructions for machinery parts 1.4 FunctionThe faces of the seal ring and the mating ri

42.3 Damage may cause leakage in gaseous form. The hazardous effects correspond to those of the product, and there may be hazard to persons or the e

5Split Mechanical Seal MSS - Installation and maintenance instructions for machinery parts4.0 Transport, Storage4.1 The mechanical seal must be tr

6 ! Ensure the highest degree of cleanness. Force must not be used to install the seal. Use only suitable tools and devices. ! The seal faces of the m

7Split Mechanical Seal MSS - Installation and maintenance instructions for machinery parts! Tools needed for installation:- A 5/32“ T-handle or rig

86.0 Installation 6.1 The mechanical seal type MSS is installed in the mixer in accordance with the ins-tructions from the machine manufacturer and

9Split Mechanical Seal MSS - Installation and maintenance instructions for machinery partsDimensional Data for MSS with Piloted Insert (Refer