Flowserve PRS 9 Manuel d'utilisateur télécharger pdf (Page 9)

Attention

To provide sufficient ventilation, ensure a minimum spacing of 20 mm

between adjacent units.

Installation

Design “c”/“d”

1. Install the guide rails and the screw-type connector in the 19" magazine.

2. Introduce the 19" slide-in unit onto the guide rails until it hits the stop.

3. Tighten the fixing screws .

Tools

■

Screwdriver for slotted screws, size 5, completely insulated according to VDE 0680.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Flowserve PRS 9 Manuel d'utilisateur Page 9