Flowserve E-Series Unibody Flanged Manuel d'utilisateur télécharger pdf

McCANNA Valves

1. Installation

These valves may be installed in any position. The installation of these

flanged end valves require no special instruction

—

just the use of

good pipe fitting practices. Flanges conform to ANSI Standards B16.5

1988 Class 150 (ERP1 or EFP1) or Class 300 (ERP3).

2. Stem Seal Adjustment

If leakage is evident in stem packing area, tighten the adjusting nut

turn. If leak still persists, repeat above. Replacement of stem seals

(10) is indicated if the leak is still apparent after

turn.

3. Disassembly for Seal Replacement

aWARNING: Begin with the valve partially open in a depressurized line.

A. Remove flange bolts and nuts (not provided) and lift body (11)

from line for servicing.

IM002G

E-Series Unibody Flanged End Ball Valves

Models EFP1:

2" – 1

2"; ERP1: 2" – 4"; ERP3: 1

2" – 4"

Installation, Operation and Maintenance Instructions

Item Description

1 Handle

2 Stem

3 Stop Pin (not shown)

4 Handle Retainer Nut

5Travel Stop (1" and larger only)

6 Gland Ring

7 End Adaptor

8 Ball

9Seat (2)

10 Stem Seals

11 Body

12 End Seal

13 Grounding Washer

14 Adjusting Nut

15 Seat Socket (

2" – 1

2" EFP1 & 2" ERP1 only)

16 Spacer Seal (

" – 1

" EFP1 & 2" ERP1 only)

Sizes

2" – 1

2" — Full Port CLASS 150 - EFP1

Sizes 2" – 4" — Regular Port CLASS 150 - ERP1

Sizes 2" – 4" — Regular Port CLASS 300 - ERP3

1 2 3 4

Résumé du contenu

Page 1 - 2. Stem Seal Adjustment

McCANNA Valves1. InstallationThese valves may be installed in any position. The installation of theseflanged end valves require no special instruction

Page 2 - 4. Reassembly

NOTE: Care should be taken to avoid scratching or damaging gasketsurface on flange face.B. Unscrew end adaptor (7) from body (11) by using hex nut or

Page 3 - 5. Testing

Flow Control DivisionMcCANNA ValvesIM002G 3F. Temporarily thread the end adaptor (7) into the body (11) using ahex nut or hexagonal bar (dimensions ar

Page 4 - McCANNA Valves

NOTICE: McCANNA Valves are designed and manufactured using good workmanship and materials, and they meet all applicable industry standards. Flowserve

Commentaires sur ces manuels

Pas de commentaire

Flowserve E-Series Unibody Flanged Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Flowserve E-Series Unibody Flanged. Flowserve E-Series Unibody Flanged User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Flowserve E-Series Unibody Flanged