Flowserve ValveSight Diagnostics Manuel d'utilisateur télécharger pdf (Page 39)

ValveSight Diagnostics for HART User Manual FCD VSENSF0001-02-AQ 03/15

ﬂowserve.com

This screen shows the number of upgrades originally ordered, the total number used, and remaining upgrades that are still

available from the computer in use. To obtain additional upgrades see the ValveSight License/Upgrade Management screen.

To upgrade a device, go on-line with the positioner that you desire to upgrade. Select the upgrade desired. This will

upgrade the positioner and decrease the number of remaining upgrades by one. Only a Standard positioner may be

upgraded to Advanced. Only an Advanced positioner may be upgraded to Pro.

Note: The ability to upgrade will not be available if pressure sensors are not detected by the positioner.

9.3 Basic/Local Interface

The Logix MD positioners have a local interface that provides support for essential setup and calibration functions of the

unit. The Logix MD positioners can also be remotely conﬁgured. The features on this page allow for remote conﬁguration

and override the selections indicated on the positioner DIP switches.

Local Interface

The “Local Interface” box contains an On/Off switch. This switch enables/disables the ability of a user to change the

conﬁguration at the device. The default is On.

Active DIP Switch Settings (Software)

This area shows the settings that are currently active. They override the settings that are on the device DIP switches.

Change the settings in this area and select

Apply

WARNING: Changing these settings may cause sudden stroke movement.

Physical DIP Switch Settings (Software)

This area shows the settings that are currently selected on the DIP switches on the positioner. To make changes at the

positioner, change the DIP switch and press the QUICK-CAL button. The selection will be updated on this screen in both

the Physical and Active DIP Switch Settings display areas.

The

Retrieve

button can be used to show the current software and positioner settings.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Pas de commentaire

Flowserve ValveSight Diagnostics Manuel d'utilisateur Page 39