Flowserve PSS II Durametallic Manuel d'utilisateur télécharger pdf (Page 5)

Step 7 Observe the length of the

lock pin outside of the gland.

The pin should extend 2.5 to

4.8 mm (0.10 inch to 0.19 inch)

from the gland. If it is more or

less than this, remove the gland

and recheck the installation.

Step 8 Pry off the centering devices

with a screwdriver.

Step 9 Connecttheushline to the gland if required.

Step 10 Turn the shaft by handasanalchecktobesurenothingisbinding.

2.5 to 4.8 mm

(.10-.19 inch)

Step 7

Step 8

1 2 3 4 5 6 7 8

Pas de commentaire

Flowserve PSS II Durametallic Manuel d'utilisateur Page 5