Flowserve ISC2SS Manuel d'utilisateur télécharger pdf (Page 8)

4.12 Insert the retaining ring RR

into the groove in the sleeve

assembly while pressing

down on the rotor carrier.

Make sure that the retaining

ring snaps completely into

the groove in the sleeve

assembly. (Figure 14)

4.13 Insert the outboard vibration

dampener M into the rotor

carrier. Make sure that the

vibration dampener is fully

seated at the bottom of the

rotor carrier. Place the

outboard mating ring O-ring

6 in the O-ring groove of

the rotor carrier, which is

behind the surface with two

drive flats. (Figure 15)

Figure 14

8

Retaining Ring RR

Figure 15

O-ring

6

Vibration

Dampener

M

4.14 Assemble the outboard

mating ring 3B into the

sleeve/rotor carrier

assembly, aligning

the drive flats on the

carrier and mating ring.

(Figure 16)

Figure 16

Mating

Ring

3B

Sleeve / Rotor

Carrier Assembly

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire