Flowserve SPECTORcontrol Manuel d'utilisateur télécharger pdf (Page 13)

Commissioning – continued –

CAN bus connection

The connection to the CANopen equipment is implemented via the CAN interface.

A D-subminiature plug connector in accordance with DIN 41652 must be used for the

connection. Use a multi-core flexible control cable as supply line.

Note that screened multi-core twisted-pair control cable is required as Bus line, e. g.

UNITRONIC

BUS CAN 2x2x...mm² or RE-2YCYV-fl 2x2x...mm².

UNITRONIC

is a registered trademark of LAPP Kabelwerke GmbH, Stuttgart.

Cable length Number of pairs and conductor size [mm²]

125 m 2 x 2 x 0.34

250 m 2 x 2 x 0.5

335 m 2 x 2 x 0.75

500 m

available on demand (depends on bus configuration)1000 m

1000 m

Note

The design and preparation of the data cable is an important factor for the

electromagnetic compatibility (EMC) of SPECTORcontrol .

Connection should therefore be carried out with special care

(see equipment specification of the display and operating panel HPG-200).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Pas de commentaire

Flowserve SPECTORcontrol Manuel d'utilisateur Page 13