Flowserve SPECTORcontrol Manuel d'utilisateur télécharger pdf (Page 32)

Menus of Inputs/Outputs – continued –

LRG 16-40 setup

1. In the menu LRG 16-40 CAN 1...10 press .

2. To establish or change the node ID

click in the green input field.

3. Use the on-screen keyboard to overwrite

or modify the value in the input mask.

4. Use button Node On/Off to activate or de-

activate the node ID.

5. To name the LRG 16-40 click in the input

field Name.

6. Use the on-screen keyboard to overwrite

or modify the value in the input mask.

7. To change the values of the LRG 16-40 click in the input field. First establish the

0% -100% range and then enter further values.

8. Use the on-screen keyboard to overwrite or modify the value in the input mask.

9. Use to delete the adjusted equipment or to change the type of equipment.

LRG 16-40

Setup

Logo

Name

Node Off

Node ID

0 µS

Node On

Range 100%

Range 0%

0.00

Delete

electrode?

Note

The HiHi and LoLo settings can be used for alarms and the Hi and Lo settings

for switchpoints of 2-position controllers.

For the 72 hrs operation according to TRD 604 the switchpoint HiHi does not

replace the independent equipment in the safety chain

The alarm monitoring function is de-activated when all HiHi to LoLo values

have been set to 0 µS.

The node ID settings of SPECTORcontrol must agree with the settings of the

respective devices.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Pas de commentaire

Flowserve SPECTORcontrol Manuel d'utilisateur Page 32