Flowserve SPECTORcontrol Manuel d'utilisateur télécharger pdf (Page 21)

User Interfaces – continued –

Menu overview

The display field shows all important current parameters of the boiler, e. g. level (CAN

input 1) and conductivity (CAN input 2) as well as specific burner data. The display is

made to the customer's specification and therefore serves here only as an example.

■ To show the configuration or current values

of the burner, press .

■ To show the configuration or current values

of the boiler, press .

■ To show the values or configuration of

inputs/ outputs, press .

■ To show or configure values of the controller,

press .

■ To show the configuration or current values

of the system, press .

492.9 µs71%

Overview

Logo

Level

Burner

Boiler

Conductivity

P 20.0%

Actual 87.0 °C

Setp. 88.0 °C

O² - 0.1%

LW 2

LW 1

Note

CAN input 1 is linked with level indication and CAN input 2 with conductivity

indication in the menu Overview. The values of equipment configured for

these inputs are shown in the menu Overview.

Use , which is not shown in this menu, to jump from all submenus directly

to the menu Overview. If no inputs are made within a certain period of time,

the system automatically returns to the overview menu.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Pas de commentaire

Flowserve SPECTORcontrol Manuel d'utilisateur Page 21