Flowserve SPECTORcontrol Manuel d'utilisateur télécharger pdf (Page 42)

Menus of Inputs/Outputs – continued –

Analog input 1...10 setup

1. In the menu Analog Input 1...10 press .

2. The menu Analog Input 1...10 Setup is

password protected. Press and enter

your password.

3. To select the type of sensor press button

Type. The available types of sensor are

shown in a list.

4. To activate or de-activate the analog input

press button AI On/Off.

5. To select the unit of the measured value

click in the green input field.

6. Use the on-screen keyboard to overwrite or modify the unit in the input mask.

7. To name the analog input click in the input field Name.

8. Use the on-screen keyboard to overwrite or modify the value in the input mask.

9. To change the range limits click in the corresponding input field. First establish the

0% -100% range and then enter further values.

10. Use the on-screen keyboard to overwrite or modify the value in the input mask.

AI 1

Setup

Logo

PT100

Name

Off

Range 100%

PT 100

Range 0%

Unit

Type

AI On

0.00

Note

The HiHi and LoLo settings can be used for alarms and the Hi and Lo settings

for switchpoints of 2-position controllers.

The alarm monitoring function is de-activated when all HiHi to LoLo values

have been set to 0%.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Pas de commentaire

Flowserve SPECTORcontrol Manuel d'utilisateur Page 42