Flowserve MX FOUNDATION Fieldbus Field Unit Manuel d'utilisateur télécharger pdf (Page 19)

MX/QX FOUNDATION Fieldbus Field Unit FCD LMENIM2330-01 – 08/11

ﬂowserve.com

3. Cut away the foil shield. Strip the insulation from the conductors approximately 0.4 inch (1 cm)

as shown in Figure 2.11.

Figure 2.11 – Stripping Conductors

Figure 2.12 – Applying Heat Shrink Tubing

4. Apply heat shrink tubing to insulate the braided shield and to provide stress relief to the cable as

shown in Figure 2.12.

a CAUTION: Do not melt the insulation.

5. Install ring tongue connectors as shown in Figure 2.13.

NOTE: Flowserve recommends the use of Thomas and Betts #RZ22-6 for optimum results.

Figure 2.13 – Ring tongue connectors

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Pas de commentaire

Flowserve MX FOUNDATION Fieldbus Field Unit Manuel d'utilisateur Page 19